PLB-AC Bollard Light Series
Why Choose the PLB-AC
The stylish, contemporary design of the PLB-AC series makes it a perfect fit for any new construction, renovation or retro-fit project that requires exceptional, full cut-off lighting performance with maximum energy savings.
Part of the PLB series bollard family, it is a compliment to the solar powered version and is a great solution for areas where access to wired power already exists or site conditions don’t allow for a solar powered bollard like under dense tree cover or beside a building.
- Pedestrian pathways
- Multi-use trials
- Municipal Parks
- Space delineation
- Ultra-low energy consumption
- Full cut-off lighting performance
- Maintenance free with no bulbs or ballasts to change
- Robust, vandal resistant design
10 inch top diameter
- PLB 101: 14 inches (36.7 cm)
- PLB 102: 36 inches (88.1 cm)
Marine-grade, low copper cast aluminium
Super-durable TGIC powder coat
Cast aluminium mounting plate on concrete footer or ground screw.
100,000 hour L70 lifetime LED
- 10W power consumption
- >0.98 power factor at full load
- 110 ~ 277 VAC, 47 ~ 63Hz input range
- OCP, SCP, OVP protection, auto recovery
- AC Phase – trailing-edge dimming compatible
- >100,000 hour MTBF
Warranty & Certification
- 5 year limited warranty
- CSA C22.2 No. 250.0-08 – ANSI/ UL Standard 1598
- ANSI/ UL Standard 8750
- CSA C22.2 No. 250.13-14
- LED Lighting Facts Verification Tested
- DLC listed
The optical system efficiently focuses the light where it is needed. For the PLB-AC, we offer two standard lighting distributions to optimize performance for applications from multi-use trails to docks.
All of our lighting distributions are full cutoff, meaning that they are complaint with dark sky requirements. Measurements are in footcandles.
The profile that you choose will control the timing and performance of your light through the night. The default for the PLB-AC is profile 04.
On at dusk > Off at dawn
On at dusk > Off after 6 hours
On at dusk > dim to 30% after 6 hours > Off at dawn
On at dusk > Off after 5 hours > On 1 hour before dawn> Off at dawn
On at dusk > Dim to 30% after 5 hours > Brighten to 100% 1 hour before dawn > Off at dawn
Increasing safety in a retirement community with ultra efficient solar bollards.Read More
This cool water park found a robust lighting solution with our solar bollards.Read More
Florida college installs highest efficiency bollards for increased campus safety.Read More
The PLB solar powered bollard provides effective ground level illumination for pathways and other outdoor pedestrian spaces. Downward light with cut off minimizes light trespass and adaptable technology ensures reliable performance regardless of variability in local conditions.
The robust, self-contained design combined with lithium batteries that have an 8 – 10 year life expectancy minimizes maintenance needs.
- 240 – 370 lumen output
- self-contained contemporary style
- low install cost
To ensure performance regardless of local conditions, the WLB incorporates First Light’s adaptable technology.
- 107 lumen output
- self-contained louvred style
- low install cost
The PLB-AC incorporates the design, low copper aluminium housing and TGIC powder coat that makes it robust and vandal resistant.
- 950 lumen output
- contemporary style
- ultra low power consumption